4X2/6X4/6X6 /8X4 Plane Aircraft Refueling Truck Left /Right Hand Drive Helicopter Aircraft Fueler Aviation Fuel Truck Plane Refueller

• After-sales Service: 7*24 Hours Online Service
• Warranty: 1 Year
• Transmission Type: Manual
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Power: Diesel
• Load Capacity: 31-40t
• Emission Standard: Euro 3
• Tank Volume: ＜5000L
• Drive Wheel: 8×4
• Seats: ≤5
• Horsepower: 351-450hp
• Engine Capacity: 4-6L
• Storage: Oil
• Tire Certification: ECE, GCC, ISO, DOT
• Tire Design: Tubeless
• Condition: New
• Product Name: Plane Refueller
• Steering: Left/Right Hand Drive
• Tank Capacity: 30cbm
• Loading Capacity: 25-30t
• Tank Material: Carbon Steel/Aluminium Alloy
• Tank Thickness: 6mm
• Loading Medium: Aviation Benzine and Aviation Kerosene
• Tire Specitication: 12.00-20/12.00r20
• Tire Quantity: 12+1units
• Gear Box: 12jsd180t Dd
• Feed Port: Wo European Standard Tank Ports
• Pressure Vent Valves: 2sets
• Brake System: Full Air Brake System, Split Pneumatic Circuit
• Suspension: 9- Leaf Spring with Shock Absorber
• Fuel Tank: 350lit
• Transport Package: Naked Packing After Waxing
• Specification: 12000x2500x3180mm
• Trademark: Dongrun
• Origin: China
• Production Capacity: 1000sets/Year
• Package Size: 1200.00cm * 250.00cm * 318.00cm
• Package Gross Weight: 10000.000kg

Product Description

 

Product Description

 Aircraft refueling truck refers to those special vehicles that provide refueling and pumping for aircraft at the airport. Unlike ordinary diesel and gasoline, many aircraft use jet kerosene. As we all know, aviation kerosene is corrosive to general metals, so it is necessary for oil tanks, pipelines, pump bodies, refueling machines and other kerosene flow through the location, should be anticorrosive stainless steel. Aircraft refueling trucks are basically the same as ordinary refueling trucks in general, but there are some special requirements in performance and structure.
1. High stability requirements for refueling pressure. To this end, pressure regulator, pressure regulator and pressure oiler are installed on the fuel line.
2. The cleanliness of oil is high. High performance filter separator should be used on the oil circuit. Tanks and pipes must be made of aluminum alloy.
3. Absolutely ensure the safety of refueling. Antistatic devices, interlocking control systems, electrical explosion-proof devices, fire extinguishers, etc., should be installed.
4. Equipped with high precision, large flow meter.

Product Parameters

Petroleum Tanker (30,000 Litres)
General	Chassis Brand	Dongfeng
	Overall Dimension	12000*2500*3200 mm
	GVW	31000kg
Cab	Cab Capacity	3 persons allowed
	Air Conditioner	Air conditioner is optional
Engine	Fuel Type	Diesel
	Engine Model	L375-30
	Power	375HP
	Emission Standard	Euro II
Chassis	Drive Type	8X4, right/left hand drive
	Wheelbase/No. of axle	1850+4800+1350mm
	Tyre Specification	12.00-20/12.00R20
	Tyre Number	12 tyres and 1 spare tyre
	Max Speed	85 km/h
	Paint	Metallic paint
tank body	Tank Capacity	30,000 Litres
	Tank Material	Carbon steel/Aluminium Alloy
	Pump	Fuel pump equipped for overhead delivery
	Head	6 m thick
	Hose	High quality, wire strengthened hose, with cooper wire, anti-static
	All standard accessories: manhole, ladder, inlet, discharge.....
Optional	Tank body of 5.6mm, Seal Head: 5.7mm, Partition plate: 5.7mm, Single warehouse, Special 50 # hydraulic reel 20 m and gun, Special DN65 hydraulic reel 20 meters with two aviation pressure stabilization joint (with large character code flow meter 0.2 level accuracy) total flow of 2500 L/min; explosion-proof light; With coalescent separator (150F / hour); Self-priming centrifugal pump (pump in pump out) with auxiliary drive shaft drive hydraulic station; A 6-inch floating ball liquid level meter; One HYJ-63X connector valve on the left and right sides, Elastic soft connection; Operating equipment box: Remote magnetron switch, Hand throttle (including the cylinder), Pressure control valve in the pipe, venturi, High-liquid-level control valve, Magnetic control refueling programmer. Vacuum gauge, pressure gauge, differential pressure gauge, Venturi pressure gauge, hydraulic pressure gauge. Filter front / rear / discharge sampling (closed sampler); and self-made sampling recovery cylinder. Hydraulic lifting platform is installed between the equipment cabin and the cab, above which two sets of 6 m DN65 hose (stainless steel rotary joint) including pressure stabilizing joint valve, equipped with distance sensor, with movable guardrail, tank inside / outer ladder; 2 / toolbox / operation box; 2 sets of single bridge plate folding fender, side protection / rear protection / pipe / ball valve / gaskets / bolts;

Detailed Photos

 

Related Trucks

Packaging & Shipping

About US

Hubei Dongrun Automobile Co.,Ltd is a professional manufacturer with 30 years experiences in vehicle field. The main products are Side wall semi trailer, flatbed semi trailer, bulk cement tank semi trailer, concret mixer truck,Container transport skeleton semi trailer, car carrier,refrigerated truck, dumper truck etc. 
We dedicate to provide high quality trucks and trailers by innovation technology and strict quality inspections. we aim to ruduce the customer's cost by professional and efficiency service. We provide customized solutions to meet different needs and requirements. As well as offering customer flexible terms of payment and on time delivery.

At now, we sold 15 series include 200 Models for more than 100 countries in Asia, Africa, Europe, South America, North America, Middle East etc. Hope to establish long-term relationships with you. 



Pre-sales
  1.Free Pre-Sales Consulting  
  2.Free videos and picture offering  
  3.Any kind of technical infomation are available .
  4.Offer progressing solution to reduce cost.
  
  After-sales
  1.Full technical support by e-mail,  video or call
  2.Lifelong maintenance and spare parts supply
  3.Free training installation and operation.
  4.Quickly response in 12hours to reduce losse
1.Professional Technology
 We have our own R & D Team with more than 30 years experience in auto field .
 
 2.Better Quality
 We have advanced production equipment and have a strict quality inspection team. To ensure better quality before you get our     vehicle product.

 3.Reasonable Price
 We offer more competitive prices while ensuring quality.

 4.Thoughtful Service
 We have 7*24hours online service to answer cutstomer pre-sale and after-sale questions. Offer cutstomer longer warranty.

 5.On Time Delivery
 In the peak season we will ensure that your vehicle products on time delivery, in the off-season we can delivery your vehicle   products in advance.
6.Strong Strength
 Our company total investment is 1 billion RMB.  Our factory occupies an area of 350,000 square meters. the annual sales of   vehicle products are 2 billion RMB per year.
1 What information should I provide  if I want to get a quotation?
 Please tell us the purpose of using this truck/semi trailer.road condition, cargo type,loading requirement,dimensions           requirement, quantity etc. The  more information you provide, the more accurate model and price you will get.
 
 2 What kind of payment do you acccept?
 We mostly accept L/C and T/T.

 3 Can I customize my own Truck or semi trailer?
 YES! We support personal customization.such as suspension, ABS, tires, loading capacity, demension, function, etc. Different        configeration, different price.
 
 4 What is the delivery date?
 It usually takes 20 to 35 days of receiving the deposit.